DOI: 10.5937/jaes16-13888
This is an open access article distributed under the CC BY-NC-ND 4.0 terms and conditions.
Volume 16 article 497 pages: 50 - 59
The goal of the study is to suggest an algorithm for optimizing honeycomb vacuum panels geometry to be used for the bodies of railroad passenger cars and insulated railroad cars, which would ensure the desired car strength, its minimum mass and improved heat-insulation properties. For the calculation of panel strength and heat transfer characteristics, the method of fi nite elements in the SolidWorks Simulation environment was used. An optimization criterion was suggested for the honeycomb structure of panels, which made it possible to select the panel geometry ensuring a minimal body mass for a passenger or refrigerated railroad car and the best thermal resistance for its enclosure. Static load strength tests of the models of passenger/insulated railroad car bodies made of solid plates identifi ed the minimum permissible panel plate thickness for different parts of the car body. Сomparative trials and examinations of solid plates and honeycomb panels revealed the optimum honeycomb panel structure variants for different parts of the car body based on the optimization criterion minimum. Having replaced solid plates in car body models with profi le-optimized honeycomb panels, we defi ned the mass and thermal resistance of the cars. For a passenger car, the mass of the body amounted to 11.14 t, the average thermal resistance was 3.187
Artemyev, R. I., Balalayev, A. N., & Kiselev, D. A. (2016). Algoritm proektirovaniya kuzova passazhirskogo vagona iz alyuminievykh ekstrudirovannykh paneley [An algorithm for designing railroad passenger car bodies from extruded aluminum panels], Novaya nauka: opyt, traditsii, innovatsii: Mezhdunarodnoe nauchnoe periodicheskoe izdanie po itogam Mezhdunarodnoy nauchno-prakticheskoy konferentsii (24 aprelya 2016 g., g. Omsk) [New science: experience, traditions, innovation. International scientific c serial following the International Scientifi c and Practical Conference (April 24th, 2016, city of Omsk, Russian Federation]. (Part 2, pp. 107–117). Sterlitamak: AMI. (In Russian).
Attetkov, A. V., Galkin, S. V., & Zarubin, V. S. (2003). Metody optimizatsii: Uchebnik dlya vuzov [Optimization methods: A university handbook] (2nd ed., reprinted). Moscow: Moscow State Technical University Press. (In Russian).
Bombardier (2011). INNOVIA ART 200 EnvironmentalProduct Declaration. Retrieved from http://www.bombardier.com/content/dam/Websites/bombardiercom/supporting-documents/Sustainability/Reports/BT/Bombardier-Transportation-EPD-INNOVIA-ART-200-en.pdf.
Borovkov, A. I., Burdakov, S. F., Klyavin, O. I., Melnikova, M. P., Mikhaylov, A. A., Nemov, A. S., Palmov, V. A., & Silina, E. N. (2012). Kompyuternyy inzhiniring. Analiticheskiy obzor: uchebnoe posobie [Computer-aided engineering. An analytical review. Manual]. St. Petersburg: St. Petersburg Polytechnic University. (In Russian).
GOST R 51690-2000 (2000). “Vagony passazhirskie magistralnykh zheleznykh dorog kolei 1520 mm” [Russian State Standard GOST No. 51690-2000 “Passenger cars for main railway lines, gauge 1520 mm”]. Gosstandart Rossii, Moscow, 2000. (In Russian). Retrieved from http://vsegost.com/Catalog/28/28489.shtml
Dostal, M. (2012). DB-Wagen. Reisezug- und Guterwagen der Deutschen Bahn. Munchen: GeraMond. (In German).ECSS-Q-ST-70-09C (2008). Measurements of thermo-optical properties of thermal control materials. Space product assurance. [pdf] ECSS Secretariat ESA-ESTEC Requirements & Standards Division, Noordwijk, The Netherlands, 31 July 2008. Retrieved from https://escies.org/download/webDocumentFile? id=62828
Finckenor, M. M., & Dooling, D. (1999). Multilayer Insulation Material Guidelines, MSFC-RPT-653A. [pdf] MSFC, Alabama, April 1999. Retrieved from https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19990047691.pdf
Karminskiy, V. D. (2005). Tekhnicheskaya termodinamika i teploperedacha: Kurs lektsiy [Engineering thermodynamics and heat transfer: A lecture course]. Moscow: Marshrut. (In Russian).
Kelley, C. T. (1999). Iterative methods for optimization. [pdf] SIAM, Philadelphia, 1999. Retrieved from http://www.siam.org/books/textbooks/fr18_book.pdf
Konyukhov, A. D., Zhuravleva, L. V., & Shurtakov, A. K. (2007). Ekstrudirovannye alyuminievye paneli — perspektivnyy material dlya kuzovov vagonov [Extruded aluminum panels: a promising material for railroad car bodies. Vagony i vagonnoe khozyaystvo, 2, 36–38. (In Russian).
Levental, L. Ya., & Kostin, A. V. (1998). Energetika refrizheratornykh i passazhirskikh vagonov: Uchebnoe posobie [Energy engineering of passenger cars and refrigerated wagons: Manual]. Moscow: MIIT. (In Russian).
Normy dlya rascheta i proektirovaniya vagonov zheleznykh dorog MPS kolei 1520 mm (nesamokhodnykh). Utverzhdeny Ministerstvom putey soobshcheniya Rossiyskoy Federatsii, Komitetom Rossiyskoy Federatsii po mashinostroeniyu 22.02.1996 (1996)[“Norms and standards for calculation and designing of railroad cars, Ministry of Transport, gauge 1520 mm, unpowered vehicles”. Approved and adopted by the Ministry of Transport of the Russian Federation and Committee for Mechanical Engineering of the Russian Federation, as of February 22, 1996]. GosNIIV — VNIIZhT, Moscow, 1996. (In Russian).
Sapa (2010). Sapa Mass Transportation. Retrieved from http://www.sapagroup.com/companies/Sapa%20Mass%20Transportation/Documents/Rail-Rolling_Stock.pdf (Accessed 2008)
Tsygan, B. G. (Ed.) (2008) Sovremennoe vagonostroenie [Railroad car building today]. (In 4 vols. Vol. 1. Organizatsiya i tekhnologiya proizvodstva metallokonstruktsiy vagonov [Organization and technology of railroad cars’ metal structure fabrication]). Kharkov: Tekhnostandart. (In Russian).
Tsygan, B. G. (Ed.) (2012). Sovremennoe vagonostroenie [Railroad car building today]. (In 4 vols. Vol. 3. Zheleznodorozhnyy podvizhnoy sostav [Railway rolling stock]). Kremenchug: Kremenchugskaya gorodskaya tipografi ya. (In Russian).
Uralvagonzavod (n.d.). Vagon-khopper dlya mineralnykh udobreniy model 19-5167 [Hopper car for mineral fertilizers, model 19-5167], (In Russian). Retrieved from http://www.uvz.ru/products/19-5167.
Vladcargo (2016). Types and sizes of refrigerated,ITW and a thermos cars. RETRIEVED FROM http://www.vladcargo.ru/info/sizes-containers-rail-cars-aircraft/types-and-sizes-of-refrigerators-cars-thermos.html.
Volochek, Е. S., Kiselev, D. A., & Parenyuk, M. A. (2016). Thermal properties of the body of an insulated railroad car made of extruded polyamide vacuum panels. In: Science and life: Proceedings of the international scientifi c conference. Czech Republic, Karlovy Vary — Russia, Moscow, 28–29 April 2016. In I. P. Klimov, I. V. Ignatko, V. B. Mantusov (Eds.). [pdf] Skleně ný Mů stek, Karlovy Vary — MCNIP, Kirov,2016, pp. 15–25. (In Russian). Retrieved from api. palmknihy.cz/web/data/Book_161178.Preview.pdf2
Zharikov, V. A. (2006). Klimaticheskie sistemy passazhirskikh vagonov [Air conditioning systems in passenger railroad cars]. Moscow: TRANSINFO. (In Russian).
Zhukov, I. P. (2014). Reshenie zadach teploprovodnosti metodom konechnykh elementov: uchebnoe posobie [Solving heat conduction problems by the fi nite elements method: Manual]. Tambov: Tambov State Technica