DOI: 10.5937/jaes0-28119
This is an open access article distributed under the CC BY 4.0
Volume 19 article 784 pages: 217 - 229
This paper discusses the role of the active anti-roll bar system in order to enhance the roll stability of cars, thereby
preventing rollover phenomenon in high speed emergency situations. First, an integrated full car model is proposed
including the longitudinal, lateral, vertical motions and an electro-hydraulic actuator model. In this full car model, the
control signal being the input current which is supplied to the actuators to create the active torques to improve the
car's stability. This is the most general model in theory to study this active roll control system and is a big step forward
compared to previous related studies. The optimal LQR control method has then been used to synthesize the controller
based on the integrated model with 26 degrees of freedom. The criteria used to assess the vehicle roll stability
are the sprung mass roll angle and the interactive force between the wheels and the road surface. The simulation
results in the frequency domain and the validation in the time domain through the CarSim software's nonlinear car
model clearly show the advantages of this active system with an optimal LQR controller in preventing vehicle rollover.
1. M. Kurhe Nikhil, Dheeraj Hari Daspute. (2018). Dynamic analysis of anti roll bar. Materials today: proceedings, vol. 5, no. 5, p. 12490-12498, https://doi. org/10.1016/j.matpr.2018.02.230
2. Van Tan Vu, Olivier Sename, Luc Dugard, Peter Gaspar. (2017). Enhancing roll stability of heavy vehicle by LQR active anti-roll bar control using electronic servovalve hydraulic actuators. Vehicle System Dynamics, vol. 55, no. 9, p. 1405-1429, https://doi.org/ 10.1080/00423114.2017.1317822
3. Sampson David, David Cebon. (2003). Active Roll Control of Single Unit Heavy Road Vehicles. Vehicle System Dynamics, vol. 40, no. 4, p. 229-270, DOI: 10.1076/vesd.40.2.229.16540
4. Van Tan Vu, Olivier Sename, Luc Dugard, Peter Gaspar. (2019). An Investigation into the Oil Leakage Effect Inside the Electronic Servo-valve for an H∞/LPV Active Anti-roll Bar System. International Journal of Control, Automation and Systems, vol. 17, p. 2917-2928, http://dx.doi.org/10.1007/s12555- 019-0060-2
5. S. Yim, K. Jeon, K. Yi. (2012). An investigation into vehicle rollover prevention by coordinated control of active anti-roll bar and electronic stability program. International Journal of Control, Automation and Systems, vol. 10, no. 2, p. 275-287, 2012. https:// doi.org/10.1007/s12555-012-0208-9
6. K. Yamamoto, H. Nishimura. (2011). Control system design of electric power steering for a full vehicle model with active stabilizer. Journal of System Design and Dynamics, vol 5, no. 5, p. 789–804, https:// doi.org/10.1299/jsmemovic.2010._3A14-1_
7. Mohamed Krid, Faiz Benamar. (2011). Design and control of an active anti-roll system for a fast rover. IEEE International Conference on Intelligent Robots and Systems, San Francisco, CA, USA. DOI: 10.1109/IROS.2011.6094963
8. Milos Maljkovic, Ivan Blagojevic, Vladimir Popovic, Dragan Stamenkovic. (2018). Impact of the damper characteristics on the behavior of suspension system and the whole vehicle. Journal of Applied Engineering Science, 2018, vol. 16, br. 3, str. 349-357, Doi:10.5937/jaes16-17342
9. Vesna Spasojevic Brkic, Zorica Veljkovic, Ahmed Ali Essdai, Aleksandar Brkic. (2019). Differences in anthropometric measurements between Libyan and Serbian passenger car drivers and crane operators. Journal of Applied Engineering Science, 2019, vol. 17, br. 1, str. 1-7, Doi:10.5937/jaes17-19969
10. Noraishikin Zulkarnain, Fitrian Imaduddin, Hairi Zamzuri, Saiful Amri Mazlan. (2012). Application of an Active Anti-roll Bar System for Enhancing Vehicle Ride and Handling. IEEE Colloquium on Humanities, Science & Engineering Research (CHUSER 2012), December 3-4, 2012, Kota Kinabalu, Sabah, Malaysia, DOI: 10.1109/CHUSER.2012.6504321
11. N. Zulkarnain,H. Zamzuri, Y. M. Sam, S. A. Mazlan, S. M. H. F. Zainal. (2014). Improving Vehicle Ride and Handling Using LQG CNF Fusion Control Strategy for an Active Antiroll Bar System. Abstract and Applied Analysis, http://dx.doi.org/10.1155/2014/698195
12. Balazs Varga, Balazs Nemeth, Peter Gaspar. (2015). Design of Anti-Roll Bar Systems Based on Hierarchical Control" Journal of Mechanical Engineering, vol. 61, no. 6, p. 374-382, https://doi.org/10.5545/svjme. 2014.2224
13. Balazs Varga, Balazs Nameth, Peter Gaspar. (2013). Control design of anti-roll bar actuator based on constrained LQ method IEEE 14th International Symposium on Computational Intelligence and Informatics (CINTI), Budapest, Hungary, DOI: 10.1109/ CINTI.2013.6705219
14. Balazs Varga, Balazs Nemeth, Peter Gaspar. (2014). Hierarchical Design of Electro-Hydraulic Actuator Control for Vehicle Dynamic Purposes. European Control Conference (ECC), Strasbourg, France, DOI: 10.1109/ECC.2014.6862427
15. S. Gosselin-Brissona, M. Bouazaraa, M.J. Richardb. (2009). Design of an active anti-roll bar for off-road vehicles. Shock and Vibration, vol. 16, p. 155-174, https://doi.org/10.3233/SAV-2009-0459
16. Van Tan Vu, Olivier Sename, Luc Dugard, Peter Gaspar. (2016). Active anti-roll bar control using electronic servo valve hydraulic damper on single unit heavy vehicle. 8th IFAC International Symposium on Advances in Automotive Control (AAC 2016), Jun 2016, Norrkoping, Sweden. p. 418-425, https://doi. org/10.1016/j.ifacol.2016.08.062, (hal-01314529)
17. Andras Mihaly, Peter Gaspar, Hakan Basar Gan. (2019). Maximizing autonomous in-wheel electric vehicle battery state of charge with optimal control allocation. 18th European Control Conference (ECC), Napoli, Italy, DOI: 10.23919/ECC.2019.8796288
18. Tudon-Martinez, J., Lozoya-Santos, J., and Morales- Menendez, R. (2012). Efficiency of On-Off Semiactive Suspensions in a Pick-up Truck. SAE Int. J. Commer. Veh, vol. 5, no. 1, p. 333-342, https://doi. org/10.4271/2012-01-0979
19. T. J. Yuen, R.Rahizar, Z. A.M. Azman, A. Anuar, D.Afandi. (2013). Design optimization of full vehicle suspension based on ride and handling performance. FISITA 2012 World Automotive Congress, vol. 195 of Lecture Notes in Electrical Engineering, p. 75-86, https://doi.org/10.1007/978-3-642-33835-9_8
20. Skogestad Sigurd, Ian Postlethwaite. (2005). Multivariable Feedback Control, John Wiley & Sons.
21. P. Dawei, K. Zhenxing, W.Xianhui, W. Hongliang, C. Shan. (2018). Design and experimental validation of control algorithm for vehicle hydraulic active stabilizer bar system. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 233, no. 5, p. 1280-1295, https:// doi.org/10.1177/0954407018770539
22. Van Tan Vu, Olivier Sename, Luc Dugard, Peter Gaspar. (2019). H∞/LPV controller design for an active anti-roll bar system of heavy vehicles using parameter dependent weighting functions. Heliyon, vol. 5, no. 6, https://doi.org/10.1016/j.heliyon.2019. e01827
23. Andrzej Renski. (2001). Identification of Driver Model Parameters. International journal of occupational safety and ergonomics, vol. 7, no. 1, p. 79-90, DOI: 10.1080/10803548.2001.1107647