Istrazivanja i projektovanja za privreduJournal of Applied Engineering Science

TRANSIENT ANALYSIS OF LAMINATED PLATES IN THERMAL ENVIRONMENT


DOI: 10.5937/jaes0-43714 
This is an open access article distributed under the CC BY 4.0
Creative Commons License

Volume 22 article 1164 pages: 19-28

Ibtehal Abbas Sadiq
University of Baghdad, Engineering College, Department of Mechanical Engineering, Baghdad, Iraq

Widad Ibraheem Majeed*
University of Baghdad, Engineering College, Department of Mechanical Engineering, Baghdad, Iraq

Transient displacement of laminated plates under combined load based on Mantari’ s displacement field are investigated. The solution is implemented under transient mechanical load (sinusoidal, step and triangular sinusoidal distributed pressures pulse) and thermal buckling for plates with different layer orientation and thickness ratio. Equations of motion based on higher-order theory are derived through Hamilton’s principle, and solved using Navier-type solution for simply supported laminated plates. The results are presented for many effective parameters such as the number of laminate and orientation on the dynamic response of plates. Results show the validity of this displacement field in studying response of laminated thick and thin plates under varied transient loading and design parameters.

View article

1.      Jameel A., Sadiq I. and Nsaif H. (2012). Buckling analysis of composite plates under thermal and mechanical loading. Journal of Engineering. vol. 18, no. 12, 1365-1390.

2.      Jamil A. and Hussien R. (2015). Vibration analysis of angle-ply laminates composite plate under thermo-mechanical effect. Journal of Engineeringvol. 21, no.11, 1-23.

3.      Sadiq I. and Majeed W. (2018). Thermal buckling of angle-ply laminated plates using new displacement function. Journal of Engineering, vol. 25, no. 12, 96-113. https://doi.org/10.31026/j.eng.2019.12.08.

4.      Chen Q., Fei Q., Devriendt H., Wu S., Pluymers B. and Desmet W. (2020). The dynamic bending analysis of plates under thermal load using an efficient wave-based method. Thin-Walled Structuresvol. 149https://doi.org/10.1016/j.tws.2019.106421.

5.      Sator L., Sladek V. and Sladek J. (2019). Coupling effects in transient analysis of FGM plates bending in non-classical thermoelasticity. Composites Part B: Engineeringvol. 165, 233-246.

6.      Dang Z. and Mao Z. (2020). Dynamic response analysis of a thin-walled rectangular plate subjected to thermoacoustic loadings. archives of thermodynamics, vol. 41, no. 1, 151–174, DOI: 10.24425/ather.2020.132953.

7.      Zenkour, A. and El-Shahrany, H. (2021). Hygrothermal vibration of adaptive composite magnetostrictive laminates supported by elastic substrate medium. European Journal. Of Mechanics - A / Solid, vol. 85, https://doi.org/10.1016/j.euromechsol.2020.104140.

8.       Bidgoli M., Loghman A., Arefi M., (2019). The effect of grading index on two-dimensional stress and strain distribution of FG rotating cylinder resting on a friction bed under thermomechanical loading. Journal of Stress Analysisvol. 3, no. 2, 75-82.

9.      Madeh A., Majeed W. (2022). Effect of thermal environment on transient response of laminated shallow shell with different boundary conditions. Journal of Engineering Science and Technology, vol. 17, no. 5, 3160 – 3173.

10.   Majeed W. and Sadiq I. (2023),’ Thermal buckling and stability of laminated plates under non uniform temperature distribution’, Steel and Composite Structures, vol. 47, no. 4, 503-511 https://doi.org/10.12989/scs.2023.47.4.503

11.   Majeed W. and Tayeh F. (2015). Stability and dynamic analysis of laminated composite plates. Journal of Engineering, vol. 21, no. 8, 139.

12.   Duc N.Tuan N. , Tran P.   and Quan T. (2017). Nonlinear dynamic response and vibration of imperfect shear deformable functionally graded plates subjected to blast and thermal loads.
Mechanics of Advanced Materials and Structures
, vol. 24, no. 4, 1-43.
 https://doi.org/10.1080/15376494.2016.1142024.

13.   Xu Z.  and Huang Q. (2019). Vibro-acoustic analysis of functionally graded graphene-reinforced nanocomposite laminated plates under thermal-mechanical loads. Engineering Structures, vol. 186, 345-355. https://doi.org/10.1016/j.engstruct.2019.01.137.

14.   Akbas, Seref D. (2020). Dynamic responses of laminated beams under a moving load in thermal environment. Steel and Composite Structuresvol. 35, no. 6729-737. https://doi.org/10.12989/scs.2020.35.6.729.

15.   Kallannavar V., Kumaran B., Kattimani S. (2020). Effect of temperature and moisture on free vibration characteristics of skew laminated hybrid composite and sandwich platesThin-Walled Structures, vol. 157, 107-113.

16.   Malekzadeh P.  Monajjemzadeh S. (2012). Dynamic response of functionally graded plates in thermal environment under moving load. Mechanics of advanced materials and structures, vol.23, no.3, 248-258. https://doi.org/10.1080/15376494.2014.949930.

17.   Panda S. and Katariya P. (2015). Stability and free vibration behavior of laminated composite panels under thermo-mechanical loading. International Journal of Applied and Computational Mathematicsvol. 1, 475–490.

18.   Chandraa S., Sepahvanda K., Matsagarb V.  and Marburga S. (2019). Stochastic dynamic analysis of composite plate with random temperature increment. Composite Structuresvol. 226, 1-14.  https://doi.org/10.1016/j.compstruct.2019.111159.

19.   Pawlus D.  and Fantuzzi N. (2021). Temperature effect on stability of clamped–clamped composite annular plate with damages. Materials, vol. 14, no. 16, 1-24. https://doi.org/10.3390/ma14164559.

20.   Pham-Tien, D., Pham-Quoc, H., Vu-Khac T. and Nguyen-Van, N. (2017). Transient analysis of laminated composite shells using an edge-based smoothed finite element method. International Conference on Advances in Computational Mechanics, Springer, Singapore, 1075-1094.

21.    Rivera, M., and Reddy, J. (2017). Nonlinear transient and thermal analysis of functionally graded shells using a seven-parameter shell finite element. Journal of Modeling in Mechanics and Materials, vol. 1, no. 2. https://doi.org/10.1515/jmmm-2017-0003.

22.   Sun Y. (2021). Buckling and vibration performance of a composite laminated plate with elastic boundaries subjected to local thermal loading. Hindawi Shock and Vibration, vol. 2021, 1-9. https://doi.org/10.1155/2021/5537946.

23.   Bidgoli M., Loghman A., Arefi M. and Faegh  R. (2023). Transient stress and deformation analysis of a shear deformable FG rotating cylindrical shell made of AL-SIC subjected to thermo-mechanical loading, Australian Journal of Mechanical Engineering, vol.21, no.1, 279-294. DOI: 10.1080/14484846.2020.1842296

24.   Smaisim G.Bidgoli M.Goh K. and Bakhtiari  H.  (2022). Review of thermoelastic, thermal properties and creep analysis of functionally graded cylindrical shell. Australian Journal of Mechanical Engineering. DOI: 10.1080/14484846.2022.2100045.

25.   Mantari J.Oktem A.Soares C. (2012). A new higher order shear deformation theory for sandwich and composite laminated plates. Composites Part B: Engineering, vol.43, no. 3, 1489-1499. https://doi.org/10.1016/j.compositesb.2011.07.017.

26.   Reddy, J. (2003). Mechanics of laminated composite plates and shells: theory and analysis. CRC press. Printed in the united states of America.

27.   Khdeir A. & Reddy J. (1989). Exact solutions for the transient response of symmetric cross-ply Laminates using a higher-order plate theory. Composites Science and Technology, vol. 34, no.3, 205-224. https://doi.org/10.1016/0266-3538(89)90029-8.

28.   Khdeir A. and Reddy J. (1988). Dynamic response of antisymmetric angle laminated plates subjected to arbitrary loading. Journal of sound and vibration, vol. 126, no. 3, 437-445. https://doi.org/10.1016/0022-460X(88)90222-2.