Istrazivanja i projektovanja za privreduJournal of Applied Engineering Science

JUSTIFICATION OF RATIONAL OPERATing PARAMETERS OF VIBRATION DISC-WORKing ENGINES OF SEEDing UNITS TO IMPROVE ENERGY-TECHNOLOGICAL INDICATORS


DOI: 10.5937/jaes0-48227 
This is an open access article distributed under the CC BY 4.0
Creative Commons License

Volume 22 article 1178 pages: 184-198

Georgy Guryanov
D. Serikbayev East Kazakhstan Technical University, International School of Engineering, Kazakhstan

Mikhail Doudkin
D. Serikbayev East Kazakhstan Technical University, International School of Engineering, Kazakhstan

Alina Kim*
Miras University, Vice-rector for academic affairs, Kazakhstan

Andrey Vavilov
D. Serikbayev East Kazakhstan Technical University, International School of Engineering, Kazakhstan

Yelibek Asangaliev
D. Serikbayev East Kazakhstan Technical University School of Earth Science, Kazakhstan

Vladimir Yakovlev
D. Serikbayev East Kazakhstan Technical University, International School of Engineering, Kazakhstan

Olga Vasilyeva
D. Serikbayev East Kazakhstan Technical University, School of Earth Science, Kazakhstan

Oleg Vavilov
Novosibirsk state technical university, Faculty of automation and computer engineering, Department of Automation, Russian Federation

The article addresses the interaction of disc vibration working elements of a seed drill with soil to reduce traction resistance and energy consumption in soil processing. Regularities characterizing the impact of vibrations on the soil are identified, and a mechanical-mathematical model of soil cutting by the vibrational disc-working element of a seed drill is developed. Mathematical dependencies for determining the parameters of vibro-impact interaction of the cutting edge of the disc-working element with the soil are obtained. The efficiency conditions of the vibro-cutting process, in terms of reducing traction resistance and energy consumption, are established. A methodology for selecting rational parameters for vibro-cutting soil in the design and operation of the disc-working element of seeding equipment is developed. Experimental results of a prototype vibrational working equipment are presented, confirming theoretical findings and demonstrating the effectiveness and feasibility of vibrational soil cutting by the disc-working element for reducing traction resistance and energy costs. The research, the results of which are presented in this article, is funded by the Committee on Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan (grant AP14869252 "Development of the universal sowing complex with increased productivity for the agro-industrial production of the Republic of Kazakhstan").

View article

The research, the results of which are presented in this article, is funded by the Committee on Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan (grant AP14869252 "Development of the universal sowing complex with increased productivity for the agro-industrial production of the Republic of Kazakhstan").

1.      Spasin, I. (2006). Agricultural machinery and technology. Kolos.

2.      Pimenov A.V. (2013). Choosing a direct seeder. Agricultural consultant, vol. 1, no. 6, 14-16

3.      Bulavintsev R.A. (2018). Analysis of coulter designs of modern seeders for direct sowing of agricultural crops. Agricultural technology and energy supply, vol. 2, no. 19, 85-91.

4.      Babitskiy L. (2009). Metodika opredileniya regimov raboty kolebatelnykh ustroystv pochvoobrabatyvayuschix rabochix organov s prinuditelnym pryvodom. Commission of Motorization and Energetics in Agriculture, vol. no. 11B, 9-14.

5.      Aduov M., Nukusheva S., Kaspakov E., Isenov K., Volodya K. and Tulegenov T. (2020). Seed drills with combined coulters in No-till technology in soil and climate zone conditions of Kazakhstan. Acta agriculturae scandina-vica, Section B: Soil & Plant Science, vol. 70, nо. 6, 525-531. https://doi.org/10.1080/09064710.2020.1784994. 

6.      Mlynchak M. and ect. (2022). Analysis of trends in the development of sowing complexes, their main components and assemblies. Bulletin of D. Serikbaev East Kazakhstan Technical University, no. 4, 75-85.

7.      Rogovsky V.V., Doudkina Ye.L., Mlynczak M. and ect. (2022). Review and analysis of existing designs of seeding machines, Bulletin of D. Serikbaev East Kazakhstan Technical University, no. 4, 130-139.

8.      Rogovsky V.V., Kurmangaliev T.B., Mlynchak M. and ect. (2023). Design justification and development of a new combined sowing section for work in the conditions of the agro-industrial complex of Kazakhstan. Bulletin of D. Serikbaev East Kazakhstan Technical University, no. 2, 60-73.

9.      Rogovsky V.V., Kurmangaliev T.B. and ect. (2023). Determination of forces and traction resistance to the penetration of coulter disks of the sowing section into the soil. Bulletin of D. Serikbaev East Kazakhstan Technical University, no. 3, 158-175.

10.   Moldakhanov, B., Kustarev, G., Andryukhov, N., Rogovsky, V., Doudkina, Y. and ect. (2021). Experimental Studies of the Physical Model of the Milling-Rotary Snow Cleaner. International Review of Mechanical Engineering (I.RE.M.E.), vol. 15, no. 9, 453-463. DOI: https://doi.org/10.15866/ireme.v15i9.20952

11.   Moldakhanov, B. and ect. (2021). Determination of Forces in the Working Unit of the Milling-Rotary Snow Cleaner. International Review of Mechanical Engineering, vol. 15, no. 2, 2021. 96-105. https://doi.org/10.15866/ireme.v15i2.20859 

12.   Sakimov, M. and ect. (2020). Mathematical and experimental study of deformations of a steel roll of a road roller with a variable geometry of a contact surface. Production Engineering Archives, vol. 25, 1-7. https://doi.org/10.30657/pea.2019.25.01

13.   Młyńczak, M., Kustarev, G., Kim, V. and ect. (2019). Development and parameter justification of vibroscreen feed elements. Mining Machines and Earth-Moving Equipment: Problems of Design, Research and Maintenance, 203–226.

14.   Likunov, A. and ect. (2020) New technology of the steel fiber manufacturing from technogenic waste. International Journal of Mechanical and Production Engineering Research and Development, vol. 10, no. 3, 611-622. DOI: 10.24247/ijmperdjun202056

15.   Kombayev, K.K., Mlynczak, M., Rakhadilov, B.K. and ect. (2019).Surface hardening of the aluminum alloys AL3 by electrolytic-plasma treatment. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, vol. 4, no. 436, 222–229.

16.   Surashev, N., Doudkin, M., Yelemes, D., Kalieva, A. (2013). The planetary vibroexciter with elliptic inner race. Advanced Materials Research, 229–232.

17.   Pichugin, S.Y., Fadeyev, S.N., and ect. (2013). Calculation of the interaction of working body of road machine with the surface. Life Science Journal, vol. 10, no. 12, 832–837.

18.   Nikolaev, L.A., Soyunov, A.S. (2017). Application of vibration in soil cultivation. Electronic scientific and methodological journal of Omsk State Agrarian University, vol. 1, no. 8, 1-5

19.   Bugayev, A., Doudkina, Y. and ect. (2021). Development of mounted impact-rotor working equipment for destruction of snow-ice formations. International Review of Mechanical Engineering, vol. 15, no. 5, 258-267. DOI: 10.15866/ireme.v15i5.20805

20.   Apshikur, B., Mlynczak, M. and ect. (2019). Development of an installation for shear ground testing in the railway track construction. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, vol. 6, no. 438, 22–35.