Istrazivanja i projektovanja za privreduJournal of Applied Engineering Science

Volume 19 Number 4

ISSN: 1451-4117
E-ISSN: 1821-3197

Bakytzhan Donenbayev, Karibek Sherov, Assylkhan Mazdubay, Aybek Sherov, Medgat Mussayev, Riza Gabdyssalyk, Saule Ainabekova, Aizhan Taskarina, Sayagul Tussupova - 10.5937/jaes0-27504

INVESTIGATION OF THE METHOD OF PROCESSING HOLES WITH A ROTARY CUP CUTTER WITH SURFACING

Nhu-Tung Nguyen, Van Thien Nguyen, Dung Hoang Tien, Duc Trung Do - 10.5937/jaes0-29654

MULTI-OBJECTIVE OPTIMIZATION OF TURNING PROCESS USING A COMBINATION OF TAGUCHI AND VIKOR METHODS

Devi Oktaviana Latif, Amalia Ula Hazhiyah, Adhitya Yoga Purnama - 10.5937/jaes0-29022

APPLICATION OF GEOELECTRICAL METHODS FOR IDENTIFICATION OF SOIL LAYER

S Narayan, Muhammad Usman Kaisan, Shitu Abubakar - 10.5937/jaes0-29675

A REVIEW OF VIBRO-ACOUSTIC TECHNIQUES FOR CONTROL OF COMBUSTION ENGINE NOISE

Muhammad Arif Budiyanto, Hamnah Ayuningtyas - 10.5937/jaes0-29942

PERFORMANCE ANALYSIS OF WATERJET PROPULSION ON UNMANNED SURFACE VEHICLE MODELS

Nguyen Thuy Duong, Pham Van Hung - 10.5937/jaes0-31374

EFFECT OF HUMID TROPICAL CLIMATE ON FRICTION CHARACTERISTIC OF PNEUMATIC CYLINDERS

Widjonarko, Cries Avian, Setya Widyawan Prakos, Bayu Rudiyanto - 10.5937/jaes0-30440

PERFORMANCE IMPROVEMENT ON MOTOR BLDC SPEED CONTROLLER BY USING MULTI CONTROLLER WITH SUMMATION TECHNIQUE

Muhammad Faizal, Nabila Aprianti, Muhammad Said, Subriyer Nasir - 10.5937/jaes0-30990

SYNGAS DERIVED FROM CATALYTIC GASIFICATION OF FINE COAL WASTE USING INDONESIAN POTENTIAL CATALYST

Baatyr Zh. Akmatov, Nurzhamal T. Aldasheva, Baktybek S. Childebaev, Zhalil O. Kuluev, Malika S. Elchieva - 10.5937/jaes0-30997

THE DEPENDENCE OF THE COEFFICIENT OF EFFICIENCY (CE) OF THE HEATING INSTALLATION “EFI” UPON THE INITIAL TEMPERATURE OF THE HEAT-CARRYING AGENT

Wirawan Sumbodo, Wahyudi, Rizki Setiadi, Kriswanto, Febrian Arif Budiman - 10.5937/jaes0-28957

DESING AND FABRICATION OF ELECTRIC BIKE WITH SLIDING FRAME

Reem Ahmed, Obai Younis, Ali Mohammed Hamdan, Dania Ahmed, Ali Ahmed Ali, Ibrahim Ahmed - 10.5937/jaes0-31154

DETERMINING THE EFFECT OF NOZZLE GROOVE ON THE FLUID FLOW THROUGH VISCOUS 2D PLANAR FLUID

Vladimir Kolchunov, Aleksey Dem'yanov, Maxim Protchenko - 10.5937/jaes0-32660

THE NEW HYPOTHESIS ANGULAR DEFORMATION AND FILLING OF DIAGRAMS IN BENDING WITH TORSION IN REINFORCED CONCRETE STRUCTURES

Widya Wijayanti, Mega Nur Sasongko, Musyaroh Musyaroh - 10.5937/jaes0-29995

EFFECT OF ZEOLITE ON THE CATALYTIC CRACKING OF TAR YIELDS MAHOGANY WOOD PYROLYSIS

Eethar Thanon Dawood, Mafaz Hani Abdullah - 10.5937/jaes0-29726

INVESTIGATION THE EFFECTS OF GREEN MORTAR PARAMETERS USING ANALYTICAL METHODS

Andrés Pacheco Lancheros, Aura Lombana Puerta, Álvaro Realpe Jiménez, Dina Mendoza Beltrán, María Acevedo Morantes - 10.5937/jaes0-30227

DEVELOPMENT AND CHARACTERIZATION OF POLY(OXY-1,4-PHENYLENESULFONYL-1,4-PHENYLENE) FOR PROTON EXCHANGE MEMBRANES

Yuan-Shyi Peter Chiu, Chih-Yun Ke, Victoria Chiu, Ming-Hon Hwang - 10.5937/jaes0-30139

OPTIMIZING A MULTIPRODUCT MANUFACTURINGSYSTEM WITH DELAYED DIFFERENTIATION, OUTSOURCING, EXPEDITED RATE, AND REWORK STRATEGIES

Bulgakov Alexey Grigorievich, Dubrakova Ksenia Olegovna, Aseev Viacheslav Yurievich* - 10.5937/jaes0-34494

METHODS FOR CALCULATING RECTANGULAR SECTION BEAMS MADE OF WOOD AND CONCRETE

Zhanar O. Oralbekova, Gulnur A. Tyulepberdinova, Gulnur G. Gaziz, Aigul D. Adamova, Bakytgerey B. Sholpanbaev - 10.5937/jaes0-30937

THE USE OF RADAR TECHNOLOGIES IN THE HYDRAULIC ENGINEERING IN SEISMIC ZONES

Mohammad Hamasha, Haneen Ali, Sa’d Hamasha, Abed Abdulaziz Ahmed - 10.5937/jaes0-29895

A MATHEMATICAL APPROXIMATION TO LEFT-SIDED TRUNCATED NORMAL DISTRIBUTION BASED ON HART’S MODEL

Tuan Nguyen Anh, Vu Anh Nguyen Le, Tri Quoc Pham - 10.5937/jaes0-30025

INVESTIGATING THE BEHAVIOR OF PILED RAFT FOUNDATION IN CORE WALL FOUNDATION OF HIGH-RISE BUILDINGS

Kateryna Oriekhova, Oleksander Kendiukhov, Oleksii Zakharkin, Olesia Solodovnik, Liudmyla Zakharkina, Tetiana Murovana - 10.5937/jaes0-30842

OPTIMIZATION MODELLING OF ENGINEERING ENTERPRISES FINANCIAL SECURITY IMPROVEMENT

Tuan-Hung Nguyen, Huynh-Xuan Le - 10.5937/jaes0-30656

STRUCTURAL FUZZY RELIABILITY ANALYSIS USING THE CLASSICAL RELIABILITY THEORY

Budi Raharjo, Nurul Farida, Purwo Subekti, Rima Herlina S Siburian, Putu Doddy Heka Ardana, Robbi Rahim - 10.5937/jaes0-30175

OPTIMIZATION FORECASTING USING BACK-PROPAGATION ALGORITHM

Abdi Ismail, Achmad Zubaydi, Bambang Piscesa, Tuswan Tuswan, Rizky Chandra Ariesta - 10.5937/jaes0-30373

STUDY OF SANDWICH PANEL APPLICATION ON SIDE HULL OF CRUDE OIL TANKER

Gulnaz Zh. Moldabayeva, Raikhan T. Suleimenova, Sairanbek M. Akhmetov, Zhanar B. Shayakhmetova, Gabit E. Suyungariyev - 10.5937/jaes0-30840

THE PROCESS OF MONITORING THE CURRENT CONDITION OF OIL RECOVERY AT THE PRODUCTION FIELDS IN WESTERN KAZAKHSTAN

Gigih Priyandoko, Purbo Suwandono, Ubaidillah - 10.5937/jaes0-28945

DEVELOPMENT OF VIBRATION ISOLATOR USING MAGNETORHEOLOGICAL ELASTOMER MATERIAL BASED

Zhmakin Vitaly Anatolievich, Budnikov Victor Sergeevich - 10.5937/jaes0-31856

RESEARCH OF THE POSSIBILITY OF TRANSMISSION OF LIQUEFIED NATURAL GAS THROUGH A PIPELINE BY A NON-PRESSURE METHOD

Valentina Siwi Saridewi, Riri Fitri Sari - 10.5937/jaes0-28530

IMPLEMENTATION OF MACHINE LEARNING FOR HUMAN ASPECT IN INFORMATION SECURITY AWARENESS

Yuri Anatolievich Doroshenko, Anatoliy Andreyevich Rudychev, Viktoriia Nikolayevna Riapukhina - 10.5937/jaes0-34688

TECHNOLOGICAL MODERNISATION PROSPECTS FORECAST OF THE MAIN INDUSTRIES IN RUSSIA BASED ON THE ASSESSMENT OF INNOVATIVE DEVELOPMENT LEVEL