DOI: 10.5937/jaes0-28205
This is an open access article distributed under the CC BY 4.0
Volume 18 article 754 pages: 737 - 744
The purpose of this article is to investigate the process of the influence of a nonstationary load on an arbitrary region
of an elastic anisotropic cylindrical shell. The approach to the study of the propagation of forced transient oscillations
in the shell is based on the method of the influence function, which represents normal displacements in response to
the action of a single load concentrated along the coordinates. For the mathematical description of the instantaneous
concentrated load, the Dirac delta functions are used. To construct the influence function, expansions in exponential
Fourier series and integral Laplace and Fourier transforms are applied to the original differential equations. The
original integral Laplace transform is found analytically, and for the inverse integral Fourier transform, a numerical
method for integrating rapidly oscillating functions is used. The convergence of the result in the Chebyshev norm is
estimated. The practical significance of the work is that the obtained results can be used by scientists or students to
solve new problems of dynamics of cylindrical shells on an elastic basis under pulse loads. The found non-stationary
influence function opens up possibilities for studying the stress-strain state, solving nonstationary inverse and contact
problems for anisotropic shells, studying nonstationary dynamics in the case of nonzero initial conditions, and also
when constructing integral equations of the boundary element method.
1. Gorshkov, A.G., Medvedsky, A.L., Rabinsky, L.N., Tarlakovsky, D.V. (2004). Waves in continuous media. FIZMATLIT, Moscow.
2. Bogdanovich, A.E. (1985). Deformation and strength of cylindrical composite shells under dynamic loads. Zinatne, Riga.
3. Bogdanovich, A.E. (1987). Nonlinear problems of the dynamics of cylindrical composite shells. Zinatne, Riga.
4. Koshkina, T.B. (1984). Deformation and strength of reinforced composite cylindrical shells under dynamic compressive loads. Academy of Sciences of the Latvian SSR, Riga.
5. Bazilevs, Y., Pigazzini, M.S., Ellison, A., Kim, H. (2018). A new multi-layer approach for progressive damage simulation in composite laminates based on isogeometric analysis and Kirchhoff-Love shells. Part I: Basic theory and modeling of delamination and transverse shear. Computational Mechanics, vol. 62, no. 3, 563-585, Doi: 10.1007/s00466-017- 1513-1.
6. Ghaffari, R., Sauer, R.A. (2020). A nonlinear thermomechanical formulation for anisotropic volume and surface continua. Mathematics and Mechanics of Solids, vol. 25, no. 11, 2076-2117, Doi: 10.1177/1081286520919483.
7. Gilmanov, A., Stolarski, H., Sotiropoulos, F. (2017). Non-linear rotation-free shell finite-element models for aortic heart valves. Journal of Biomechanics, vol. 50, 56-62, Doi: 10.1016/j.jbiomech.2016.11.031.
8. Tarlakovsky, D.V., Fedotenkov, G.V. (2015). Nonstationary 3D motion of an elastic spherical shell. Mechanics of Solids, vol. 50, no. 2, 208-217.
9. Li, H., Hu, X., Yang, H., Li, L. (2016). Anisotropic and asymmetrical yielding and its distorted evolution: Modeling and applications. International Journal of Plasticity, vol. 82, 127-158, Doi: 10.1016/j.ijp-las.2016.03.002.
10. Mikhailova, E.Yu., Tarlakovsky, D.V., Fedotenkov, G.V. (2018). Transient contact problem for liquid filled concentric spherical shells and a rigid barrier. Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics. Springer, Cham, p. 385-386.
11. Fedotenkov, G.V., Tarlakovsky, D.V., Vahterova, Y.A. (2019). Identification of non-stationary load upon Timoshenko beam. Lobachevskii Journal of Mathematics, vol. 40, no. 4, 439-447.
12. Vakhterova, Ya.A., Fedotenkov, G.V. (2019). Non-stationary inverse problem for the identification of defects in an elastic rod. XII All-Russian Congress on Fundamental Problems of Theoretical and Applied Mechanics: A Collection of Works in 4 Vol¬umes. Vol. 3: Mechanics of a Deformable Solid. RIC BashGu, Ufa, p. 878-880.
13. Vakhterova, Ya.A., Serpicheva, E.V., Fedotenkov, G.V. (2017). The inverse problem on the identification of a non-stationary load for a Timoshenko beam. Izvestia of the Tula State University. Technical Science, vol. 4, 82-92.
14. Pigazzini, M.S., Kamensky, D., van Iersel, D.A.P., Alaydin, M.D., Remmers, J.J.C., Bazilevs, Y. (2019). Gradient-enhanced damage modeling in Kirchhoff-Love shells: Application to isogeometric analysis of composite laminates. Technical Conference of the American Society for Composites, vol. 346, 152- 179, Doi: 10.1016/j.cma.2018.10.042.
15. Okonechnikov, A.S., Tarlakovsky, D.V., Fedotenkov, G.V. (2019). Transient interaction of rigid indent¬er with elastic half-plane with adhesive force. Lobachevskii Journal of Mathematics, vol. 40, no. 4. 489-498.
16. Serdyuk, A.O., Serdyuk, D.O., Fedotenkov, G.V. (2020). Green’s function for an unlimited thin anisotropic plate. Materials of the XXVI International Symposium “Dynamic and Technological Problems of Mechanics of Structures and Continuous Media” named after A.G. Gorshko. TRP, Moscow, p. 106- 108.
17. Serdyuk, A.O., Serdyuk, D.O., Fedotenkov, G.V. (2020). Influence function for a plate with arbitrary anisotropy of the material. Materials of the XXVI International Symposium “Dynamic and Technological Problems of Mechanics of Structures and Continuous Media” named after A.G. Gorshko. TRP, Mos¬cow, p. 98-103.
18. Lokteva, N.A., Serdyuk, D.O., Skopintsev, P.D. (2020). Nonstationary dynamics of thin anisotropic elastic cylindrical shells. Materials of the XXVI International Symposium “Dynamic and Technological Problems of Mechanics of Structures and Continuous Media” named after A.G. Gorshko. TRP, Mos¬cow, p. 99-91.
19. Blinov, D.G., Prokopov, V.G., Sherenkovskii, Yu.V., Fialko, N.M., Yurchuk, V.L. (2002). Simulation of natural convection problems based on low-dimensional model. International Communications in Heat and Mass Transfer, vol. 29, no. 6, 741-747.
20. Ryndin, V.V., Ivin, V.I. (1981). Investigation of multicylinder engine filling-up nonuniformity. Izvestia vyssih ucebnyh zavedenij. Masinostroenie, vol. 10, 71-75.
21. Sultanov, K., Khusanov, B., Rikhsieva, B. (2020). Underground pipeline strength under non-one-dimensional motion. IOP Conference Series: Materials Science and Engineering, vol. 883, no. 012023.
22. Tepole, A.B., Kabaria, H., Bletzinger, K.-U., Kuhl, E. (2015). Isogeometric Kirchhoff-Love shell formulations for biological membranes. Computer Methods in Applied Mechanics and Engineering, vol. 293, 328-347, Doi: 10.1016/j.cma.2015.05.006
23. Toporovskiy, V., Kudryashov, A., Samarkin, V., Shel¬dakova, J., Rukosuev, A., Skvortsov, A., Pshonkin, D. (2019). Bimorph deformable mirror with a high density of electrodes to correct for atmospheric distortions. Applied Optics, vol. 58, no. 22, 6019-6026.
24. Skvortsov, A.A., Pshonkin, D.E., Luk'yanov, M.N., Rybakova, M.R. (2018). Deformations of aluminum alloys under the influence of an additional load. Periodico Tche Quimica, vol. 15, no. 30, 421-427.
25. Blinov, D.G., Prokopov, V.G., Sherenkovskii, Yu.V., Fialko, N.M., Yurchuk, V.L. (2004). Effective method for construction of low-dimensional models for heat transfer process. International Journal of Heat and Mass Transfer, vol. 47, no. 26, 5823-5828.
26. Mikhailova, E.Yu., Tarlakovsky, D.V., Fedotenkov, G.V. (2018). Elastic plates and shallow shells. Publishing House MAI, Moscow.
27. Cuomo, M., Fagone, M. (2015). Model of anisotropic elastoplasticity in finite deformations allowing for the evolution of the symmetry group. Nanoscience and Technology: An International Journal, vol. 6, no. 2, 135-160, Doi: 10.1615/NanomechanicsSciTechno¬lIntJ.v6.i2.40.