DOI: 10.5937/jaes0-50953
This is an open access article distributed under the
CC BY 4.0
Volume 22 article 1196 pages: 323-328
Marija Grujić*
Faculty of Civil Engineering, University of Belgrade, Belgrade, Serbia
Anđela Knežević
Faculty of Architecture, University of Belgrad, Belgrade, Serbia
Nikola Knežević
Faculty of Civil Engineering, University of Belgrade, Belgrade, Serbia
Energy breakdown information is an important factor in the process of building design. It gives the designer direction in the decision-making process of choosing the most adequate building design. Location parameters, thus the climate conditions, are the first determining factor for energy breakdown in buildings – it is determining whether we are dealing with a heating or cooling dominated climate. But in the real environment, there are further parameters that can influence energy breakdown in office buildings, such as site parameters. Site characteristics determine the available orientation of the building’s facade and define obstructions to incoming solar radiation. This study deals with differences in orientation dependent energy breakdown in office buildings for Belgrade continental climate. The influence of site obstructions on incoming solar radiation was neglected due to the comparative nature of this study. A set of four different highly glazed facades of a single office was combined with a set of four different glazing types, resulting in sixteen models. The simulation was carried out with full and partial control of visual and thermal comfort. The results in this study show that energy breakdown for different orientations of a single office can have great variations. These variations in energy breakdown are primarily connected with the duration and intensity of insolation on the façade and properties of glazing, such as the percentage of glazed area on the façade (window-to-wall parameter (WWR)) and solar factor (g) and visual transmittance (τ) of glazing and the level of integrated systems for comfort control.
1. Grujic, M. (2018). Optimizacija stepena transparentnog zastakljenja fasade administrativnih zgrada u klimatskim uslovima Beograda. PhD thesis, Faculty of Architecture, University of Balgrade, Belgrade
2. Hegger, M., Fuchs, M., Stark, T., Zeumer, M. (2008). Energy Manual. Sustainable Architecture. 1st edition, Birkhäuser Architecture, Berlin, Basel, cited on p.95
3. Grynning, S., Time, B., Matusiak, B. (2014). Solar shading control strategies in cold climates – Heating, cooling demand and daylight availability in office spaces. Solar Energy, vol.107, 182–194, DOI: 10.1016/j.solener.2014.06.007
4. Da Silva, P.C., Leal, V., Andersen, M. (2012). Influence of shading control patterns on the energy assessment of office spaces. Energy and Buildings, vol. 50, 35-48, DOI: 10.1016/j.enbuild.2012.03.019
5. Nielsen, M.V., Svendsen, S., Jensen, L.B. (2011). Quantifying the potential of automated dynamic solar shading in office buildings through integrated simulations of energy and daylight. Solar Energy, vol. 85, no. 5, 757–768, DOI: 10.1016/j.solener.2011.01.010.
6. Tzempelikos, A., Athienitis, A. K. (2007). The impact of shading design and control on building cooling and lighting demand. Solar Energy, vol. 81, no. 3, 369–382, DOI: 10.1016/j.solener.2006.06.015
7. Shen, H., Tzempelikos, A. (2012). Daylighting and energy analysis of private offices with automated interior roller shades. Solar Energy, vol. 86, no. 2, 681–704, DOI: 10.1016/j.solener.2011.11.016.
8. Reinhart, C. F., Jakubiec, J. A., Ibarra, D. (2013). Definition of a reference office for standardized evaluations of dynamic façade and lighting technologies. In Proceedings of BS 2013: 13th Conference of the International Building Performance Simulation Association, 3645–3652
9. Solema, Diva for Rhino, ver.3. from http://diva4rhino.com/, accessed on sept.2015
10. CEN: EN 12464-1:2021 Light and lighting - Lighting of work places - Part 1: Indoor work places, 2021.
11. Boyce, P.R., Veitch, J.A., Newsham, G.R., Jones, C.C., Heerwagen, J., Myer, M., Hunter, C.M. (2006). Occupant use of switching and dimming controls in offices. Lighting Research and Technology, vol. 38, no. 4, 358–376, DOI: 10.1177/1477153506070
